Many Buffalo homeowners who want a long-lasting, fashionable fence that requires no maintenance should install an aluminum fence. Because it resists rust and corrosion well, aluminum is a suitable choice for the region’s severe winters, heavy snowfall, and humid summers. From choosing the appropriate materials to the actual setup, we’ll take you through every crucial stage of installing aluminum fencing in this blog. We’ll also offer some helpful advice to ensure a seamless experience.
Step 1: Make a plan for installing your fence
Starting with a well-thought-out plan is a smart option before beginning the installation process. Determine the exact limits of your property first. Usually, your property survey will show this, but if not, it’s a good idea to have an expert point them out. By ensuring that everything remains on your property, you may avoid any issues with your neighbors.
Next, consider why you are installing a fence in the first place. Is it to protect your animals? Increase the exterior appearance of your house? Put an extra degree of protection? Your objectives will help you choose the ideal height and design for your aluminum fence, regardless of the cause.
After that is resolved, contact your homeowner’s association (HOA) or local municipality to see if there are any regulations you must abide by. Fence height, design, and placement may be subject to special regulations in Buffalo. There are even neighborhood rules in some places that must be adhered to. You can avoid future hassles or delays by taking care of permissions early on.
Step 2: Select the Appropriate Supplies
Getting your stuff together is the next stage after completing the planning and legal procedures. Fence panels, fence posts, gate panels (if you want to incorporate a gate), post caps, and mounting hardware are required for a typical aluminum fence installation.
Using rackable aluminum fence panels is a popular option here. These are designed to adapt to your yard’s slope, which is really helpful in Buffalo because the terrain isn’t always level. They make your fence line appear neat and level and help avoid gaps at the bottom.
Fence post spacing is another important consideration. The majority of manufacturers advise spacing posts six feet apart, but it’s wise to confirm the precise instructions included with your materials. Parts of the fence may droop or deteriorate if the spacing is incorrect. Take your time taking measures, mark each area properly with stakes or spray paint, and use a measuring tape.
Step 3: Post-hole digging
Digging post holes is where the practical job begins. To make things easier, you can utilize a power auger or a post-hole digger. Make sure the holes are at least two feet deep. Digging below the frost line will prevent your posts from moving because Buffalo winters force the ground to freeze. In Buffalo, the frost line is often 36 inches deep. As the ground shifts with the seasons, going deeper increases stability and maintains the posts in place.
Begin by filling each hole with a layer of gravel to aid in drainage. After that, position your post and pour concrete over it to ensure it is securely held in place. After ensuring that the post is straight with a level, allow the concrete to cure for 24 to 48 hours. Long-term strength greatly depends on this stage. It will be more difficult to install the panels correctly, and your fence won’t survive as long if the posts are loose or slanting.
Step 4: Installing aluminum fencing
The aluminum panels can be attached when your posts have solidified. The majority of them have brackets or screws that fit into pre-drilled holes and are designed for easy installation.
Take your time and make sure every panel is level. As you settle into the pattern, the remaining ones usually go more quickly after you’ve completed one or two. Make sure the gate opens and closes smoothly by carefully following the directions if you’re adding one.
Powder-coated panels are another option Buffalo homeowners should make sure to select. The aluminum is shielded from moisture and scratches by this kind of coating. Additionally, it keeps your fence looking nice for a long time without requiring frequent painting. Aluminum fences are particularly popular because of their powder coating, which maintains their beauty with very little upkeep.
Step 5: Consistent Maintenance
Aluminum fencing is very simple to maintain. To keep it appearing clean, simply rinse it once or twice a year with water and a small amount of mild soap. It’s a good idea to remove any snow that has accumulated and is pressing on the panels after a significant snowfall.
Aluminum doesn’t warp, decay, or require staining like wood does. Additionally, unlike steel, you won’t have to worry about rust. That’s why Buffalo’s climate is so ideal for it, particularly during the long, severe winters.
Make sure you check local fence permit requirements in Buffalo to avoid legal issues or delays.
FAQ
Depending on the size of the yard, the weather, and the number of gates or corners, most aluminum fence installations take one to three days. You can expedite the process by arranging your materials and planning ahead.
Although 6 feet is the standard fence post spacing, always abide by the manufacturer's instructions. Stability and sagging prevention are ensured by precise spacing.
Yes! Make use of aluminum fence panels that are rackable, as they are made to adapt to the ground's slope. This provides a neat, polished finish and prevents wide spaces at the bottom.
We encourage you to take this first step, improving your property with an aluminum fence by contacting us here at All Pro Fence Buffalo. Our crew is up for the task and making sure you have the information you need for your fence. Want to see what you are getting into or check some ideas out for your project? Contact us right away.
Call All Pro Fence Buffalo now at 716-452-9399 for a FREE estimate.
We are excited to partner with you and fabricate a beautiful perimeter safeguard for your property.
